Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
ARC WHITE
AIR CONDITIONING
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA4 AERO Body Program)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
12' TRANSLUCENT ROOF (Requires SJ1, SJ4, SJ7, SB1, SB4 or SB7 Body Programs)
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA4 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SUPREME AERO BODY PROGRAM, 110" WHEELBASE, 12' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
DARK BLUE
AIR CONDITIONING
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA4 AERO Body Program)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
12' TRANSLUCENT ROOF (Requires SJ1, SJ4, SJ7, SB1, SB4 or SB7 Body Programs)
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 110" WHEELBASE, 12' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
WHEATLAND YELLOW
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
MAXON TE-20 LIFTGATE (Requires SJ2, SJ5 or SJ8 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
WHEATLAND YELLOW
AIR CONDITIONING
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA4 AERO Body Program)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
12' TRANSLUCENT ROOF (Requires SJ1, SJ4, SJ7, SB1, SB4 or SB7 Body Programs)
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA4 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
ARC WHITE
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA4 AERO Body Program)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA4 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 110" WHEELBASE, 12' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
CARDINAL RED
AIR CONDITIONING
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
12' TRANSLUCENT ROOF (Requires SJ1, SJ4, SJ7, SB1, SB4 or SB7 Body Programs)
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 110" WHEELBASE, 12' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 110" (279.4 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
EBONY BLACK II
AIR CONDITIONING
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB1, SB4 or SB7 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA4 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (12' BODY) (Requires SJ1, SB1, SJ4, SB4, SJ7 or SB7 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA4 AERO Body Program)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA4 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
12' TRANSLUCENT ROOF (Requires SJ1, SJ4, SJ7, SB1, SB4 or SB7 Body Programs)
10' WALKRAMP (Requires SJ1, SJ4, SJ7 or SA4 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ1, SJ4 or SJ7 Body Programs)
WHEELBASE, 110" (279.4 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA4 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 110" WHEELBASE, 12' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 110" WHEELBASE, 12' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
DARK BLUE
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
14' WALKRAMP (Requires SK1 or SK2 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
HEATED MIRRORS
SEAT COVERS
REAR BODY DOME LAMP SWITCH
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 133.7" (339.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
ARC WHITE
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ2, SJ5 or SJ8 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
ROPE TIE RINGS (Requires SA5 Body Program)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 133.7" (339.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
WOODLAND GREEN
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
ARC WHITE
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
14' WALKRAMP (Requires SK1 or SK2 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
14' WALKRAMP (Requires SK1 or SK2 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
WHEATLAND YELLOW
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
14' WALKRAMP (Requires SK1 or SK2 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 133.7" (339.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
ARC WHITE
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 133.7" (339.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
CARDINAL RED
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA5 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ2, SJ5 or SJ8 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 133.7" (339.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
EBONY BLACK II
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB2, SB5 or SB8 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA5 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA5 AERO Body Program)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (14' BODY) (Requires SJ2, SB2, SJ5, SB5, SJ8 or SB8 Body Programs)
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
14' TRANSLUCENT ROOF (Requires SJ2, SJ5, SJ8, SB2, SB5 or SB8 Body Programs)
10' WALKRAMP (Requires SJ2, SJ5, SJ8 or SA5 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ2, SJ5 or SJ8 Body Programs)
WHEELBASE, 133.7" (339.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA5 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 133.7" WHEELBASE, 14' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 133.7" WHEELBASE, 14' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
CARDINAL RED
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
12" CROSS-MEMBER SPACING IN LIEU OF 16" SPACING (16' BODY) (Requires SJ3, SB3, SJ6, SB6, SJ9 or SB9 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
AIR DEFLECTOR ROOF MOUNTED
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
16' TRANSLUCENT ROOF (Requires SJ3, SJ6, SJ9, SB3, SB6 or SB9 Body Programs)
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
CUSTOM/BASE MODEL -inc: in rail fuel tank, pwr windows/door locks (REQ: C60 Air Conditioning)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
TRUCK APPLICATION (STD)
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
Cab Mounts, All steel low cab forward, BBC 70.7 in. 45 deg. mechanical tilt with torsion assist
Daytime running lamps
Windows, Tinted glass
Mirrors, Dual cab mounted exterior with integral convex mirror
Windshield Wipers, Intermittent wet-arm
4 channel anti-lock brake system
Daytime running lamps
EBD (Electronic Brake Distribution)
Multi-Information Display (MID) (monitors vital functions including diesel exhaust fluid levels (DEF), particulate matter emissions level in the diesel particulate filter (DPF), diesel particulate filter regeneration, service reminders for engine oil, transmission oil, differential oil, power steering fluid, engine oil filter, and fuel filters. The MID provides fuel economy reporting by average, instant, and trip.)
Isuzu Vehicle Health Report (Standard on all N-Series diesel trucks, exclusive to Isuzu, monitors the trucks performance, and driver behavior. Reports provide detailed information on engine operation, braking, emissions, fuel economy, acceleration & deceleration frequency, idling, and speed history. Ask your Isuzu dealer to provide you with an Isuzu Vehicle Health Report at your next service.)
AM/FM/CD stereo radio
Tricot and jersey knit combination cloth covered reclining highback driver seat with single two occupant fold down passenger seat
Floor mats
Tilt and telescoping steering column
Cruise control
Power windows & door locks
Truck Application
GVWR, 12000 lbs (5443 kg) capacity
4JJ1-TC , diesel engine 183 CID (3.0L), 150 HP at 2800 RPM, 282 LB FT gross torque at 1600-2800 RPM. 4 cylinder, 16 valve, four cycle, chain-driven dual overhead camshaft valve train, a cast iron cylinder block, and a cast aluminum cylinder head. Turbocharged, inter-cooled, water cooled EGR, direct injection, electronically controlled common rail fuel system, engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover.
Air Cleaner, Dry Paper single element (Donaldson brand). Air cleaner canister standard with air restriction gauge.
Wheelbase, 151.4" (384.6 cm), includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail
Fuel Tank, 25-gallon (94.6L) rectangular fuel tank. Mounted between frame rail through the rail fuel fill. Fuel water separator with dash mounted warning light.
Brake System, Dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission mounted parking brake. Non-asbestos semi metallic linings are standard. 4 channel anti-lock brake system.
Exhaust Brake, vacuum operated
Exhaust System, Single horizontal with DPF (Diesel Particulate Filter)
REAR AXLE RATIO, 5.125:1 (STD)
VERY DARK PEWTER, TRICOT & JERSEY KNIT COMBINATION CLOTH SEAT TRIM (STD)
EBONY BLACK II
AIR CONDITIONING
WALTCO C-20 TUCKAWAY LIFTGATE (Requires SB3, SB6 or SB9 Body Programs)
TELETRAC TELEMATICS SYSTEM (hardware only, activation requires minimum 2-year contract)
3" X 12" "D"-SHAPED RUBBER DOCK BUMPERS (Mounted vertical below rear lights) (Requires SA6 AERO Body Program)
FRONT TIRES, 215/85R16E (10 PLY) TUBELESS RADIAL, HIGHWAY (STD)
WALTCO C-20 TUCKAWAY LIFTGATE -inc: BGT-2 step, rubber bumpers and cab cut off switch cab in lieu of the standard Aero body step bumper available (Requires SA6 AERO Body Program)
(1) ROW OF SURFACE MOUNTED E-TRACK 30" C/L TO FLOOR, SIDES ONLY (Requires SK1, SE1, SK2 or SE2 Body Programs)
(2) ROWS E-TRACK ON SIDES FULL LENGTH AND ACROSS FRONT WALL (Located at 21-1/2" & 45-1/2" floor to centerline. Note - these are specific heights designed to catch the horizontal wall posts as well as the vertical wall posts) (Requires SA6 AERO Body Program)
FIRE EXTINGUISHER & TRIANGLE KIT MOUNTED IN REAR ORGANIZER
ENGINE OIL PAN HEATER (120V 300W)
WHEEL SIMULATORS
PROVISION FOR POWER-TAKE-OFF PTO Enable Switch and Engine Idle Up Switch. Recommended for PTO applications only. These switches can be port or dealer installed. Please consult the body builders guide and/or the service manual for additional programming options and functions
18' TRANSLUCENT ROOF (Requires SK1, SK2, SE1 or SE2 Body Programs)
12' WALKRAMP (Requires SJ3, SJ6, SJ9 or SA6 Body Programs)
14' WALKRAMP (Requires SK1 or SK2 Body Programs)
MAXON TE-20 LIFTGATE (Requires SJ3, SJ6 or SJ9 Body Programs)
WHEELBASE, 151.4" (384.6 CM) includes ladder type channel frame. Full C section frame flaired forward of 3rd crossmember. 29.5 inches (74.9 cm) wide. Yield strength 44,000 psi; section modulus 6.07 cu.in. and RBM 267,080 lb/ft/in per rail. (STD)
AM/FM/CD STEREO RADIO DELETE *CREDIT*
ENGINE IDLE SHUTDOWN
DEF FILL CHARGE
4JJ1-TC , DIESEL ENGINE 183 CID (3.0L), 150 HP AT 2800 RPM, 282 LB FT GROSS TORQUE AT 1600-2800 RPM. 4 CYLINDER, 16 VALVE, FOUR CYCLE, CHAIN-DRIVEN DUAL OVERHEAD CAMSHAFT VALVE TRAIN, A CAST IRON CYLINDER BLOCK, AND A CAST ALUMINUM CYLINDER HEAD. TURBOCHARGED, INTER-COOLED, WATER COOLED EGR, DIRECT INJECTION, ELECTRONICALLY CONTROLLED COMMON RAIL FUEL SYSTEM engine cruise control, and idle up function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and a protection system that will reduce fueling if excessive coolant temperature is detected. Rear engine cover. (STD)
ROPE TIE RINGS (Requires SA6 Body Program)
** A VALID EXTENDED WARRANTY REQUIRES THE VEHICLE FIRST BE REPORTED DELIVERED IN ICS. THE DEALER MUST THEN ENROLL THE VEHICLE WITH THE EXTENDED WARRANTY IN ICS **
SOLID PAINT (STD) *Lead time of 16-weeks*
SUPREME AERO BODY PROGRAM, 151.4" WHEELBASE, 16' X 84" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM PINE FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 96" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 16' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/PLYWOOD SIDES/TIE RINGS, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE
SUPREME VALUE PAK VAN BODY PROGRAM HARDWOOD FLOOR/SLAT LINING, 151.4" WHEELBASE, 18' X 90" X 79" BODY SIZE